Skip to main content
Sliding Balancer Track - Rail systems - Plymovent
Sliding Balancer Track - Rail systems - Plymovent
Sliding Balancer Track - Rail systems - Plymovent
Sliding Balancer Track - Rail systems - Plymovent
Sliding Balancer Track - Rail systems - Plymovent
Sliding Balancer Track - Rail systems - Plymovent
Sliding Balancer Track - Rail systems - Plymovent
Sliding Balancer Track - Rail systems - Plymovent
Rail systems

Sliding Balancer Track (SBT)

The Sliding Balancer Track (SBT) has set the standard for exhaust extraction of fire and emergency vehicles around the world. SBT is the preferred rail system for back-in applications.

Features
  • Back-in bays up to 39.4 ft (12 meters) deep
  • Exhaust hose sizes for all vehicle types
  • Auto-disconnect at exit door

The Sliding Balancer Track is the preferred system for back-in garage applications

The Sliding Balancer Track is designed to connect to any motor vehicle tail pipe, capturing virtually 100% of the exhaust emissions. This system is used in single, back-in garage applications where the vehicle tail pipe is within 12 meters of the door.

Recommended for

  • Fire stations
  • Ideal for single bay applications

Features

  • Back-in bays up to 39.4 ft. (12 meters) deep
  • Exhaust hose sizes for all vehicle types
  • Auto-disconnect at exit door
  • Speed absorbing shock system
  • Automatic start/stop of fan by an exhaust sensor
  • Adjustable release points depending on vehicle speed

Fully automatic

The system is fully automatic, from the fan activation to the automatic release from the exiting vehicle. There is a one-step connection to the system as the vehicle enters a garage.

The Sliding Balancer Track is right for your application if you want an exhaust removal system you can connect at the door before backing in and automatically disconnect when you leave.

TÜV SÜD certified product

The Sliding Balancer Track is available in 2 versions. The Slider Balancer Track Pneumatic (SBTP) and Slider Balancer Track Magnetic (SBTM). Both versions are certified by TÜV SÜD for safety and the production locations were monitored in Troisdorf (Germany) and Lamphun (Thailand).

The SBT is the right choice if you are looking for an exhaust removal system that is easy to use and ensures effective and efficient diesel exhaust gas removal.

A rail system alone, won't do much!

The Sliding Balancer Track can be attached to a combination of the following products:

Exhaust hoses:

Nozzles:

Balancer:

Optional

Fans:

Didn't find what you were looking for?

Our experts will be pleased to help you find a solution for your unique situation! Click here to get in touch with them.

Air Volume

The SBT supports air volumes as high as 1040 cfm (1800 m3/h).

Maximum Length

Back-In
up to 66 ft (20 m) from exit door to tailpipe (determined by hanging height).
Drive-Through
up to 72 ft (22 m) from door to door (determined by hanging height).

Energy Efficiency

Automatic start-stop of energy-efficient fan by pressure sensor.

Height Requirements

Track should be mounted 12 to 14 ft (3,7 to 4,2 m) from the floor.

Facility and Vehicle Requirements

Supports back-in and drive-through connections
Vehicles with undercarriage tailpipes

Occupational Health Benefits

Protects operators and service personnel from harmful exhaust emissions.
Operator can connect nozzle to the vehicle while standing in an upright position, further limiting exposure to harmful exhaust emissions.

Recommended Airflows

Cars
210 cfm (360 m3/h)
4 in. (100 mm) hoses:
340-400 cfm minimum
5 in. (125 mm) hoses:
540-600 cfm minimum
Recommended Air Velocity:
In ducting:
3000 - 4000 fpm (15 - 20 m/s)

Components

Internal Trolley
The SBT steel crab trolley travels inside the SBT track and allows the balancer and hose assembly to slide in a safe and effective manner.
Balancer
The non-locking spring recoil balancer controls the point at which the Grabber disconnects from the tailpipe. As the hose reaches it’s maximum length, the balancer locking cable will bottom out, in turn pulling the nozzle from the moving vehicle.
Hose Package
The hose package consists of the following:
• upper hose and metal saddle
• mid-hose
• lower hose with Safety Disconnect Handle, designed with a
  round handle and large grips, and Grabber® nozzle.
Hose Length:
Lengths are available in 19.7 ft (6 m) to 32.8 ft (10 m).
Hose Diameter:
Diameters range from 4 in. (100 mm) to 6.3 in. (160 mm)
Grabber®
The Magnetic Grabber®
Nozzle incorporates a self-aligning conical design with integrated magnets.
The Pneumatic Grabber®
Connects to the vehicle exhaust pipe via an inflatable rubber bladder.
Suspensions
Vertical and Horizontal Leg Suspension items must be ordered separately, based on a wall or ceiling mounting.

Accessories

Tailpipe Reducer & Bracket
The tailpipe reducer easily converts an exhaust tailpipe to a larger size so that the conical tailpipe adapter can be installed. In addition, a tailpipe support bracket ensures a secure connection between the tailpipe and body / chassis.
PC-500 Pressure Sensor:
Pressure sensor for automatic exhaust fan start.
Fans:
See separate data sheets for F-Series and TEV fans and mounting kits.
Starter OS-3:
Automatic control unit for exhaust fan, which can be controlled via pressure sensors or wireless transmitters.
en

Sliding Balancer Track (SBT) Product Data Sheet EN

Product data sheet
en

Sliding Balancer Track with Pneumatic Grabber Manual EN

Manual
en

Sliding Balancer Track with Magnetic Grabber Manual EN

Manual

Doesn't fit your needs?

Take a look at these options!

Crab Return System (CRS)

Rail systems

The Crab Return System (CRS) fosters productivity by eliminating the need for an operator to physically retrieve the exhaust extraction hose and nozzle after they have been disconnected from a vehicle.

Straight Rail (STR)

Rail systems

The Straight Rail (STR) is designed for drive-through applications with up to four vehicles parked in tandem.

Mini Rail Profile (MRP)

Rail systems

The Mini Rail Profile (MRP) system is an exhaust extraction system for emergency service stations and other facilities with confined spaces and/or low ceilings.

Vehicle Square Rail with External Crab (VSRX)

Rail systems

Vehicle Square Rail - External Crab (VSRX) is the ideal solution for heavy-duty vehicles that move through an apparatus garage up to 120 ft (36,5 m) in length.

Vertical Stack Rail (VSR)

Rail systems

The Vertical Stack Rail (VSR) is the solution for vehicles that have top exhaust and need to move through a garage or station.

We're happy to help!

Contact our specialists now and get answers on all your questions regarding clean air.

Sign up to newsletter

Stay up to date

Contact form

Reach out to us

Nearest locations

Find out where we are