Skip to main content
Balancer-450 - Balancers - Plymovent
Balancer-450 - Balancers - Plymovent
Balancer-450 - Balancers - Plymovent
Balancer-450 - Balancers - Plymovent
Balancers

Balancer-450

The balancer is designed to keep the exhaust extraction hose clear of the ground, thus minimizing the risk of damage to the hose and surroundings.

Features
  • 13-16 kg lifting capacity
  • Easy to install
  • Adjustable tension

The Balancer-450 is used to lift and hold the extraction hose of the ground

The balancer-450 series enables easy operation of the vehicle exhaust system. With the use of a powerful spring the balancer holds and lifts the hose of the system. The balancer is designed to balance a load within 0-15 ft.(0-4,5 m) with a maximum angle of 30° from the plumb line. The balancer is equipped with a spring tension lock which holds the wire in extended position. The locking function can easily be turned on or off depending on area of use.

Recommended for

  • Heavy duty applications
  • Military facilities
  • Drive through vehicle test facilities
  • All Plymovent STR rail systems, CRS, VSRX, booms and drops

Features

  • Easy to install
  • Adjustable tension
  • Closed housing
  • Controlled retraction (HB only)
  • Handles heavy weight
  • Lock function
  • Wire length 4,5 meters (15 ft.)
  • 13-16 kg lifting capacity
  • Micro switch ready

BRC-450/13-16-HB

The BRC-450/13-16-HB is a unique balancer integrated with a hydraulic brake, ensuring a soft close retraction until the balancer is completely retracted. This facilitates a safe retraction of the hose after disconnection without the risk of a hose flying back. The approximate retraction speed is 6 m/min. (20 ft/min) The BRC-450/13-1-HB is ideal in conjunction with the crab return system.

This balancer needs a partner in crime

The Balancer-450 can be attached to a combination of the following products:

Rail systems:

Hose reels:

Booms / hose drops:

Didn't find what you were looking for?

Our experts will be pleased to help you find a solution for your unique situation! Click here to get in touch with them.

en

Balancer-450 Manual EN

Manual
ce-mark-yellow.png

The Balancer 450 conforms to the following standard:

  • EN 292-1
  • EN 292-2

And is in accordance with the following directive:

  • 98/37/EG

Doesn't fit your needs?

Take a look at these options!

Balancer 200 & 300 series

Balancers

The Balancer-200 & -300 series are designed with safety as top priority. They lift the hose of a vehicle exhaust system and hold it in place above the shop floor. Thereby minimizing the risk of damage to the hose as it cannot be run over by a vehicle.

Sign up to newsletter

Stay up to date

Contact form

Reach out to us

Nearest locations

Find out where we are