Name: Mini Rail Profile (MRP)
Brand: Plymovent

Mini Rail Profile (MRP) is the preferred rail system for fire, ambulances and vehicle repair facilities

The Mini Rail Profile Fire (MRP-Fire) system is designed for fire and emergency systems to connect to a vehicle's tailpipe to capture and remove virtually 100% of exhaust emissions. MRP is fully automatic, from the fan activation to the automatic nozzle release from the exiting vehicle. It is easy to use with only a one-step connection to the system as the vehicle enters the facility.

The MRP is fully automatic, can accommodate up to two vehicles in tandem but can be engineered to accommodate more if need be.

MRP features a square rail profile and an internal crab trolley that runs inside the rail.

Recommended for

VEX

Military facilities
Automobile plants
Department of Transportation facilities
Motorcycle/ATV garages
Fleet service & repair bays
Agricultural equipment facilities
Bus depots

Fire & EMS

Fire stations
EMS stations
ARFF stations
Municipal fire stations
Military fire stations

Features

Perfect for smaller apparatus bays
Provides an economic solution for long back-in bays
Energy efficient system
Easy to use
Captures virtually 100% of exhaust emissions
Fully automatic
Standard design accommodates up to 2 vehicles in tandem

How The Mini Rail Profile (MRP) system works

The Mini Rail Profile Fire (MRP-F) is an automatic, magnetic exhaust gas extraction system designed for the exhaust extraction of fire and rescue vehicles with low level, undercarriage exhaust tailpipes. The system is used to remove harmful vehicle exhaust emissions from the facility by capturing and removing the exhaust at the emission source, the tailpipe.

As the vehicle exits the facility, the trolley moves along to the end of the rail. The balancer locking cable secures that the Magnetic Grabber^® is disconnected from the tailpipe outside the building.

Where the MRP is used

The rail is installed overhead along the service bays next to the fire apparatus and is connected to an exhaust fan. The internal crab is equipped with the proven concept of lower, -mid and upper hose combined with a nozzle and can be positioned at any service bay where extraction is needed.

Optimal and efficient extraction

The MRP can accommodate up to two vehicles in tandem but can be engineered to accommodate more if needed, thereby providing optimal extraction efficiency and an energy-efficient system. Exhaust emissions are vented to the outside through the rail system, typically through a single outlet.

TÜV SÜD certified product

The Mini Rail Profile (MRP) is available in 2 versions. The Mini Rail Profile Pneumatic (MRPP) and Mini Rail Profile Magnetic (MRPM). Both versions are certified by TÜV SÜD for safety and the production locations were monitored in Troisdorf (Germany) and Lamphun (Thailand).

A rail system alone, won't do much!

The Mini Rail Profile can be attached to a combination of the following products:

Exhaust hoses:

Nozzles:

Magnetic Grabber
Pneumatic Grabber

Balancer:

Optional

Fans:

FUA
TEV (50Hz / 60Hz)

Didn't find what you were looking for?

Our experts will be pleased to help you find a solution for your unique situation! Click here to get in touch with them.

Description

MRP-5,8 MRP-2,9

Aluminium profile Length 5,8m and 2,9m

MRP-S

Rail Splice

RSL-X Low friction

Low friction rubber seal

MRP-EC

Closed end stop

MRP-CE125

Duct connection Ø125mm and end stop

MIC-100

Trolley Ø100mm

TRS-00

Mounting Tool

MRP-HS

Hose Storage

REG-100-115

Rubber Nozzle with vise grip

EH-PV-100-5

Hose Length 5m

RRDC-200

Duct connection Ø200mm

Optional

Balancer

BRL-300

Suspension

Belt 512616

Damper for balancer

MRP-BD

Damper for hook

MRP-D

Physical dimensions and properties

Track:

6-18m (20´-60`)

Rail material:

Extruded aluminum

Rubber seal:

EPDM-Rubber with low friction material

Hose:

Heat resistance 150º C (300º F)
Diameter: 100mm (4”), length 5m (16ft)

Trolley:

Internal (with bearings).

Nozzle:

Rubber with CO-outlet and vise grip.

Balancer:

Optional 7-14kg lifting power, ratchet and 3m cord.

Suspensions

MRP-MKV

This is used to mount the SBT-SL support leg profile to the ceiling of your workshop. The suspension plate is adjustable for angled ceilings to adjust the pitch to vertical. Comes in sets to mount one support length.

MRP-MKH

This is used to mount the SBT-SL support leg profile to the wall of your workshop. The horizontal slide plate will allow adjustment away from or closer to the wall. Comes in sets for mounting one support suspension.

SBT-SL

This is an aluminium profile, extremely strong but light-weight for easy mounting. The profile comes in 5.8 m/19 ft and is cut to fit your application. Is sold by the piece or in packs of 24 pcs for large jobs

SBT-SBK

The SBT-SBK is designed to work with the SBT-SL profile to eliminate side movement of support legs. Comes in three lengths (430 mm/17”, 710 mm/28” or 1830 mm/72”) to handle any ceiling height or angle.

Accessories

HOSES

Plymovent has developed a wide range of exhaust hoses in cooperation with a European hose manufacturer.

FANS

Plymovent has a wide range of fans for any application and air volume needed.

NOZZLES

Plymovent has a wide range of nozzles for different types of tail pipes.

CONTROL EQUIPMENT

Plymovent has different types of intelligent control system to get the best function and flexibility out of your exhaust extraction

Selection guide

Choose length of rail

The rail is available in 2,9 m (MRP-2,9) and 5,8 m (MRP-5,8)

Choose length of rubber seal

For each meter of rail, you need the double length of rubber seal. The rubber seal (RSL-X) is delivered in the length you need. For easy installation use the tool (TRS-00)

Choose number of rail splice

The rail splice (MRP-S) joins two rails.

Choose suspensions

We recommend maximum 5 m between suspensions

Choose number of trolleys

For each trolley you need the trolley itself (MIC-100), hose (EH-PV-100-5), nozzle (REG-100-115) and hose storage (MRP-HS).

Choose hose storage

As an alternative to hose storage (MRP-HS) you can have a balancer (BRL-300) and a suspension belt. Plymovent also offers a range of different hoses and nozzles for a variety of applications. Contact us for more information. Automatic Dampers are available for both “hose storage” (MRP-HS) and “balancer” (BRL-300). MRP-HS = MRP-D BRL-300 = MRP-BD

Choose duct connection

Choose between top connection (RRDC-200) or end connection (MRP-CE125). For 1 or 2 trolleys you can use end or top connection. Use top connection for 3 trolleys. For larger installations, please, contact PlymoVent.

Choose number of end stops

You need one end stop (MRP-EC) if you have end connection and two if you have top connection.

Choose fan

Recommended air volume for car and LCV repair shops is 360 m3/h. With this air volume you select a Plymovent fan as below:

Numbers of trolleys: Fan

1: FUA 1300
2: FUA 2100
3: TEV 585

Mini Rail Profile Brochure EN

Brochure

Mini Rail Profile Manual EN

Manual

Mini Rail Profile (MRP)