Skip to main content

News & Articles

Filters
Applications
Welding and cutting fume removal

Hexavalent chromium (Chromium 6) also found in welding fumes

4 Jun 2019 Health risks

What is hexavalent chromium & how to act for best protection.
A recent case (early February 2019) of financial compensation for 800 workers who have been exposed to the hazardous hexavalent chromium in the workshop of the Nederlandse Spoorwegen (NedTrain-department) in Tilburg, the Netherlands, has again put the spotlight on the danger of this substance.

Welding and cutting fume removal

New evidence: welding fumes can cause lung cancer

22 Feb 2019 Health risks

When metals are heated above their melting point, they vaporize and condense into welding fumes. Most people know that these welding fumes are unhealthy and dangerous. Although not everybody in the metal industry – and in other lines of work where welding is done – is fully aware of the dangers, most of them are familiar with local exhaust ventilation and personal protection equipment to minimize the health risks that are involved with welding.

Welding and cutting fume removal

Welding fumes classified as Carcinogenic to humans

19 Feb 2019 Health risks

Welding fumes and UV radiation from welding are now classified as “carcinogenic to humans” by the IARC.

Welding and cutting fume removal

Metal fume fever. What is it and how to prevent it?

29 Oct 2018 Health risks

Metal fume fever is a benign, self-limiting occupational respiratory disease that results from the inhalation of fine metal particles. Whilst the exact mechanism for this condition is not known, the primary cause is thought to relate to the inhalation of zinc oxide fumes produced when zinc-coated steel or zinc-containing alloys (e.g. brass) are heated to high temperatures. A variety of other names for this condition is used, such as copper fever, brazier’s disease, welder’s ague, foundry fever, brass chills and spelter shakes.

Welding and cutting fume removalOil mist removalVehicle exhaust removalVehicle exhaust extraction in fire stations

Moving forward – in house EMC test room for electronics development

12 Oct 2018 General

Plymovent has a strong focus on innovative product development, by developing solutions for clean air at work that are ahead of the curve or add more bang for the buck.

Welding and cutting fume removalOil mist removalVehicle exhaust removal

Exclusive distributorship with Fantech Pty. Ltd.

14 Sep 2018 Distributors

Plymovent announces exclusive distributorship with Fantech Pty. Ltd. for Australia and New Zealand.

Welding and cutting fume removal

Supplied air respirators provide the best all-around protection

23 Jul 2018 Health risks

Welders must be protected against hazardous welding fumes. Depending on the welding environment or how and what is welded, welders can be protected by systems for source extraction and general filtration and ventilation. Also, they can be protected by respiratory protective equipment (RPE), such as welding helmets with fresh air supply. Supplied air respirators are known to provide the best all-around protection for the welders themselves

Welding and cutting fume removal

Welders themselves see 'health' issues as longer term and thus less salient

27 Feb 2018 Health risks

Nowadays, everybody knows that welding fumes are very dangerous and that all kinds of protective measures should be taken and respected during work. In other blogs on this site, you can read more about those dangers and risks. But is everybody really aware of the importance of those protective measures such as PPE and local exhaust ventilation? The answers of welders themselves are surprising…

Welding and cutting fume removal

At source extraction is the recommended method for weld fume extraction

16 Feb 2018 Health risks

In buildings where welding is carried out, temperature control and problems of airborne contamination are important, and the provision of clean air increases. Although fresh air is usually supplied by general ventilation, the sole use of general ventilation for airborne pollutant control in welding is usually ineffective.

Welding and cutting fume removal

Different possibilities to reduce the risks of welding fumes

24 Nov 2017 Health risks

To extract welding fumes and protect the welder, at source ventilation is always the most efficient and safe way. In addition, all kinds of measures can be taken to reduce welding fumes and its risks.

We're happy to help!

Contact our specialists now and get answers on all your questions regarding clean air.

Sign up to newsletter

Stay up to date

Nearest locations

Find out where we are